7
Slide Panel #1 & 2 (see page 4)
Into track #1 As shown in
figure C and step number 6 below.
Make sure center
brace is on the inside of building
5 C Slide Panel #4 (Clear Section)
Into track #2
As shown in figure D
*Rubber astragal is on the right side
of door panel
Track #1
Track #2
D
7 Slide Panel #3 (Clear Section) Into track #2
As shown in figure E
*Rubber astragal is on the left side
of door panel
E
8 6 Hang right side track ( track without
Operator ) as shown in Figure F
(This track will be flush with track
shown in Figure E)
Place the bottom of track on line that
was drawn 1” above opening.
Make sure track is level!!
F