Havis-Shields manual SUB Assembly, Installation, Mount C-TCB-21 into vehicle

SUB ASSEMBLY:

1.Confirm receipt of all hardware and components.

2.Remove front inner and outer passenger seat bolts on vehicle.

INSTALLATION:

1.Mount C-TCB-21 into vehicle:

•Position pole support assembly between seat base mount and floor of vehicle

•Align holes in pole support assembly with holes in seat base.

•Loosely attached factory seat bolts that were removed during subassembly.

•Mount side support brace to threaded rod located on pole support assembly using a 5/16-18 Nylock nut

•Mount side support brace to vehicle using ¼” x 1” Hex head lag bolts. A 3/16” pilot is required.

Note: When mounting side support brace to floor of vehicle, be sure to check for obstructions prior to drilling or lag bolting to floor.

•Tighten down passenger side factory seat bolts and 5/16-18-nylock nut holding side support brace to pole support assembly.

•Mount optional C-3090, computer-mounting platform, to telescoping pole assembly using hardware and instructions provided with C-3090.

C-TCB-21-INST-12-04