Hawking Technology HNT1 manual Hardware Installation, For Windows XP/2000, For Windows Me

Hawking HNT1 Net-Talk™ USB Internet Phone

2. Hardware Installation

Included with the Net-Talk™ Phone is a USB cable. Connect the smaller end of the provided USB cable to the Net-Talk™ phone and the other end to your computer’s USB port. When connected to your computer, Windows will automatically detect the new device. Complete the driver installation according to your Windows operating system, below.

For Windows XP/2000

Under Windows XP/2000, there are no drivers needed to be installed. The system will automatically install the Windows built-in audio driver. After installation completes, you are ready to use the USB phone.

For Windows Me

When the Add New Hardware Wizard screen pops up, select Automatic search for a better driver and then click Finish to complete the Windows built-in driver installation.

For Windows 98SE

Upon detecting the new device, follow these steps:

1.When the Add New Hardware Wizard screen pops up, click Next.

2.Select Search for the best driver for your device. Click Next.

3.Clear all the selections and click Next.

5