| 1.7 |
| SAFETY PRECAUTIONS | 1.7 |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
SAFETY PRECAUTIONS |
|
|
|
|
|
| ||
|
| Continued. |
|
|
| |||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
-Replace fuel tank and container caps securely.
-Replace faulty silencers.
Always ensure that the mower is in a safe operating condition. Frequently check all nuts, bolts and screws for tightness. Use only genuine Hayter replacement parts.
A damaged cutterbar or loose fixing bolt are major hazards. Before use, visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterbar must be replaced immediately with a genuine Hayter replacement part. A cutterbar which is slightly worn can be
Refer to “Maintenance”.
Operation:
Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect.
Always pull the starter cord slowly until resistance is felt, then pull the cord rapidly to avoid kickback and prevent hand or arm injury.
Mow only in daylight or good artificial light.
Avoid using the mower on wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Mow across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not mow excessively steep slopes.
Use extreme caution when reversing or pulling the mower towards you.
Stop the engine if the mower has to be tilted for transportation when crossing surfaces other than grass and when transporting the mower to and from the area to be mowed.
Never operate the mower unless the guards are securely in position and in good condition.
401001EB100398A