MAINTENANCE |
| |
LUBRICATION |
| |
How To Lubricate | Grease Fitting | |
The Jackshaft Assembly |
| |
A grease fitting is provided to lubricate the |
| |
jackshaft assembly. Use a grease gun with au- |
| |
tomotive type grease to lubricate the jackshaft | Figure 10 | |
assembly as shown in Figure 10. | ||
|
How To Change Engine Oil
Change the engine oil when the engine is warm. For the proper oil capacity, see the en- gine manufacturer’s instructions.
1.Disconnect spark plug wire from the spark plug.
2.Remove the oil drain plug as shown in Figure 11.
3.Drain all the engine oil into a flat pan.
4.Install the oil drain plug. Make sure the oil drain plug is tight.
5.Remove the dipstick.
6.Fill the engine crankcase. DO NOT OVERFILL. For proper oil capacity, see the engine manufacturer’s instructions.
7.Connect the spark plug wire to the spark plug.
Oil Drain Plug |
Figure 11 |
276798MA DRAFT COPY | 15 |