OPERATING THE MOWER
Slopes
To prevent engine damage do not use the mower on slopes greater than 20 degrees.
Height of Cut 
Move the height of cut lever sideways to disengage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut. Release the lever in the required position and ensure that it locks firmly into one of the seven notch settings.
Always select a height of cut to suit operating conditions. Prevent |
|
engine overloading and blockages by avoiding low cuts in long grass |
|
conditions. Be prepared to make two cuts when the grass is long. | 305113 |
| CS284 |
