Hayter Mowers 432G Assembling The Mower / Before Starting The Mower, Delivery Checklist, Oil Type

Models: 432G 435G 434G 433G

1 18
Download 18 pages 42.21 Kb
Page 7
Image 7
ASSEMBLING THE MOWER / BEFORE STARTING THE MOWER

ASSEMBLING THE MOWER / BEFORE STARTING THE MOWER

Delivery Checklist

Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer.

1.

Engine Handbook.

3. Parts list/D of C.

2.

Grassbag.

4. Warranty Reg Card.

To prevent accidents cut off the long ribbon attached to the grassbag and discard. (Refer fig.1)

Handlebar

Unscrew the handlebar securing knobs sufficiently to allow the handlebar to pivot. Unfold the handlebar to the operating position. Tighten both handlebar knobs to secure in position. (Refer fig.2)

Take care to ensure that the control cables do not become snagged at the pivot point.

the correct grade of oil and petrol before starting the engine. (Refer fig.4)

Oil Type

Always use high quality detergent oil classified SAE 30 oil. Never use additives with recommended oil.

To prolong the life of your engine it is important that the oil is changed after the first 5 hours of use - Refer to ‘Maintenance Schedule’.

Check Oil Level

Clean around the oil filler cap before removing. With the mower on a level surface, unscrew and remove the oil filler - dipstick. Wipe oil from it with a clean cloth. Screw the oil filler - dipstick back in place, then unscrew and remove it to check the oil level. (Refer fig.5)

The oil level is correct when it is at the full mark on the dipstick. DO NOT OVERFILL. (Refer fig.5)

Fill to base of neck to allow for fuel expansion. Do not overfill the fuel tank. (Refer fig.6)

Grassbag Attachment

Raise the rear deflector, lower the grassbag and hook in position. Lower the deflector to rest on the grassbag.

Prevent Engine Damage

To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with

Fig. 1

Fig. 2

Fig. 3

Fuel Type

Always use clean, fresh unleaded petrol. Purchase fuel in quantities that can be used within 30 days. Never mix oil with petrol. For added engine protection Briggs & Stratton recommend the use of their fuel additive which is available from an authorised Briggs & Stratton service dealer.

Fig. 4

Fig. 5

Fig. 6

 

 

FULL

 

0.15

 

L

Litres

ADD

 

I

 

O

 

 

7

Page 7
Image 7
Hayter Mowers 432G Assembling The Mower / Before Starting The Mower, Delivery Checklist, Handlebar, Oil Type, Fuel Type