111-1471 (C) 29/8/08 12:56 pm Page 1.27
MOWER MAINTENANCE
Continued Clutch Cable Adjustment
Fig. 2
3. If the distance between the clutch lever and handlebar is less than 60mm regulate the engagement position with the black plastic cable adjuster. Refer to Fig 1 and 2 to regain the 60mm distance.
1
4.Note this is a temporary adjustment and at the nearest opportunity a service should be carried out to ensure the spring on the clutch cable is attached to the gearbox clutch. This adjustment should be done using the metal adjuster at the control with the plastic adjuster reset fully wound in. When the spring is set tighten the inner lock nut to secure position.
13mm Fig. 3
extension
Clutch spring
HAY-G00147-A
Clutch lever 
Fig. 4 fully engaged
Metal adjuster
Tighten the inner nut when the cable spring is set.
Lubrication
Lubricate the wheels, pivot points and linkages with engine oil every 25 operating hours.
Apply a good quality medium grease to the inner control cables at the point of entry and exit from their outer casing.
1.27
