18.

The treadmill is capable of high speeds.

22. Do not change the incline of the treadmill by

 

Adjust the speed in small increments to

placing objects under the treadmill.

19.

avoid sudden jumps in speed.

23. When folding or moving the treadmill, make

The pulse sensor is not a medical device.

sure that the storage latch is holding the

 

Various factors, including the user's move-

frame securely in the storage position.

 

ment, may affect the accuracy of heart rate

24. Inspect and properly tighten all parts of the

 

readings. The pulse sensor is intended only

 

as an exercise aid in determining heart rate

treadmill regularly.

 

trends in general.

25. Never insert or drop any object into any

20. Never leave the treadmill unattended while it

opening on the treadmill.

 

the power cord, and switch the reset/off cir-

26. DANGER: Always unplug the power

 

is running. Always remove the key, unplug

cord immediately after use, before cleaning

 

cuit breaker to the “off” position when the

 

the treadmill, and before performing the main-

 

treadmill is not in use. (See the drawing on

tenance and adjustment procedures de-

 

page 5 for the location of the reset/off circuit

scribed in this manual. Never remove the

 

breaker.)

motor hood unless instructed to do so by an

21. Do not attempt to raise, lower, or move the

authorized service representative. Servicing

 

treadmill until it is properly assembled. (See

other than the procedures in this manual

 

ASSEMBLY on page 6, and HOW TO FOLD

should be performed by an authorized service

 

AND MOVE THE TREADMILL on page 23.) You

representative only.

 

must be able to safely lift 45 lbs. (20 kg) to

27. The treadmill is intended for in-home use

 

raise, lower, or move the treadmill.

only. Do not use the treadmill in any commer-

 

 

cial, rental, or institutional setting.

 

SAVE THESE INSTRUCTIONS

 

 

 

4

Page 4
Image 4
Healthrider H90T manual