4.While another person holds the Handlebar (13) in the position shown, connect the two console wires to the two Pulse Wires (96).
Push the wires and connectors into the Handlebar (13).
5.With the help of another person, loosely attach the right side of the Handlebar (13) to the Upright (3) with two 3/8Ó x 1 1/4Ó Bolts (92), two 3/8Ó Washers (94), and two Spacers (93). Make sure that the Spacers are positioned between the Handlebar and the console plate. Be careful to avoid pinching the wires.
Attach the left side of the Handlebar (13) in the same manner.
Firmly tighten all four 3/8Ó x 1 1/4Ó Bolts (92).
4 |
|
|
|
|
|
| 96 |
13 | Console |
| |
Wire |
|
| |
|
|
| |
Console |
|
|
|
Wire |
|
|
|
96 |
|
|
|
|
| 3 |
|
5 |
|
|
|
|
| 13 |
|
| 94 |
|
|
| 92 | 93 |
|
|
| 93 | |
93 |
| 94 | Console |
|
| Plate | |
|
| 92 | |
94 |
|
| |
| 93 | 3 |
|
| 94 |
| |
92 |
|
| |
|
|
| |
6.Make sure that all parts of the elliptical crosstrainer are properly tightened. To protect the floor or carpet from damage, place a mat under the elliptical crosstrainer.
5
