Healthrider HRT07920 manual OUR WEB Site

Return to the treadmill and stand on the foot

HOW TO USE PROGRAMS DIRECTLY FROM 7 pads. Find the clip attached to the key and slide

OUR WEB SITE

the clip onto the waistband of your clothes.

Our Web site at www.iFIT.com allows you to access				When the on-screen countdown ends, the program
				will begin and the walking belt will begin to move.
basic programs, audio programs, and video programs
				Hold the handrails, step onto the walking belt, and
directly from the internet. Additional options are soon to
				begin walking. During the program, an electronic
be available. See www.iFIT.com for details.
				“chirping” sound will alert you when the speed
To use programs from our Web site, the treadmill must				and/or incline of the treadmill is about to change.
				CAUTION: Always listen for the “chirp” and be
be connected to your home computer. See HOW TO
				prepared for speed and/or incline changes.
CONNECT YOUR COMPUTER on page 16. In
addition, you must have an internet connection and				If the speed or incline settings are too high or too
an internet service provider. A list of specific system re-
				low, you can manually override the settings at any
quirements will be found on our Web site.
				time by pressing the Speed or Incline buttons on
Follow the steps below to use a program from our				the console. However, when the next “chirp” is
				heard, the speed and/or incline will change to
Web site.
				the next settings for the program.
		Insert the key into the console.
	1			To stop the walking belt at any time, press the
		See HOW TO TURN ON THE POWER on page 10.		Stop button on the console. The Time/Incline/
				Segment Time display will begin to flash. To
		Select the iFIT.com mode.		restart the program, press the Start button or the
	2
				Speed ▲ button. After a moment, the walking belt
		When the key is in-		will begin to move. When the next “chirp” is
				heard, the speed and incline will change to the
		serted, the manual
				next settings of the program.
		mode will be selected.
		To use a program from		When the program is completed, the walking belt
		our Web site, press the
				will stop and the Time/Incline/Segment Time dis-
		Program Select button
				play will begin to flash. Note: To use another pro-
		repeatedly until the iFIT.com indicator lights.
				gram, press the Stop button and go to step 5.
		Go to your computer and start an internet
	3			Note: If the speed or incline of the treadmill
		connection.
				does not change when a “chirp” is heard, make
		Start your web browser, if necessary, and go to		sure that the iFIT.com indicator is lit and that
	4			the Time/Incline/Segment Time display is not
		our Web site at www.iFIT.com.
				flashing. In addition, make sure that the audio
		Follow the desired links on our Web site to se-		cable is properly connected, that it is fully
	5			plugged in, and that it is not wrapped around a
		lect a program.		power cord.
		Read and follow the on-line instructions for using a		Follow your progress with the displays.
			8
		program.
		Follow the on-line instructions to start the		See step 5 on page 10.
	6
		program.		When the program has ended, remove the key.
			9

When you start the program, an on-screen count- down will begin.

See step 6 on page 13.

19