6 Installation Preparation

Prepare the existing solid fuel masonry or factory built non-combustible firebox for installation.

A. Flue Damper

Fully lock the solid fuel fireplace’s flue damper in the open position, OR completely remove it.

E. Fireplace Conversion Notice

Permanently attach the label with the following warning to the inside lower back of the fireplace firebox into which the insert is being installed. Silicone may be required to properly secure the label.

B. Chimney

•Ensure chimney is constructed of non-combustible materials.

•Ensure chimney is clean and in good working order.

•Ensure that all chimney cleanouts fit properly to prevent air leakage into chimney.

C. Gas Line

Note: If the factory built fireplace has no gas access hole provided, an access hole of 1 inch (25 mm) diameter or less may be drilled through the lower sides or bottom of the firebox in a proper workmanship - like manner. This access hole must be plugged with non-combustible insulation after the gas supply line has been installed.

•Install gas line into firebox cavity.

•Check local codes and gas line sizing requirements following NFPA54. See Section 8.

WARNING

Fire Risk.

This fireplace has been converted for use with a gas fireplace insert only and cannot be used for burning wood or solid fuels unless all original parts have been replaced, and the fireplace re- approved by the authority having jurisdiction.

Prior to installing the gas insert:

•Have the chimney and adjacent structure inspected and cleaned by qualified professionals. Hearth & Home Technologies recommends that NFI or CSIA certified professionals, or technicians under the direction of certi- fied professionals, conduct a minimum of a NFPA 211 Level 2 inspection of the chimney.

•Replace component parts of the chimney and fireplace as specified by the professionals.

•Ensure all joints are properly engaged and the chimney is properly secured.

D. Hearth or Hearth Extension

WARNING

Fire Risk.

A hearth or hearth extension (if present) must comply with either of the following:

•The solid fuel burning fireplace manufacturer’s specification.

• Local building codes required by authority having jurisdiction.

• NFPA 211

F. Remote Control

The receiver for the remotes must be installed BETWEEN the base pan of the insert and the firebox of the wood- burning fireplace (see photo below).

EXISTING SIDE

REFRACTORY

REMOTE

RECEIVER

UNIT

EXISTING BOTTOM OF

FIREPLACE

10

Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev. G • 9/08

 

Page 9 Page 11
Page 10
Image 10
Hearth and Home Technologies Grand-XTS, Supreme-XTS owner manual Installation Preparation
Page 9 Page 11

Supreme-XTS, Grand-XTS specifications

Hearth and Home Technologies (HHT) has consistently set the bar in the realm of modern heating solutions, and their Grand-XTS and Supreme-XTS models exemplify this commitment to innovation and quality. These sleek and stylish gas fireplaces are designed not only to provide warmth but also to enhance the aesthetic of any living space.

The Grand-XTS model features a stunning design that can be customized to fit various interior styles. With an expansive viewing area, it allows for an impressive flame presentation that creates a cozy ambiance. The inclusion of MaxHeat technology ensures optimal heat output, making it an efficient choice for heating larger areas without sacrificing style. This model is equipped with a powerful fan system that circulates warm air throughout the room quickly, enhancing the overall comfort of your living space.

Meanwhile, the Supreme-XTS takes luxury to the next level with additional modern features. Designed for elegance, it comes with a range of decorative options, including various media beds and reflective panels that amplify the fire's glow. The fireplace's Intellifire Ignition System offers a convenient and reliable startup, ensuring that users can enjoy their fireplace with minimal hassle. Furthermore, the Supreme-XTS integrates seamlessly with smart home systems, allowing for remote operation and personalized settings directly from your smartphone.

Both models offer customizable options, including adjustable flame heights and temperature settings. This versatility lets homeowners create their desired atmosphere, whether for a warm, welcoming gathering or a more intimate setting. The advanced safety features incorporated into both models, such as automatic shut-off systems and glass safety screens, provide peace of mind while allowing for an unparalleled heating experience.

The Grand-XTS and Supreme-XTS by Hearth and Home Technologies not only prioritize efficiency and safety but also cater to individual tastes with a selection of finishes and trim options. With their superior performance, elegant aesthetics, and advanced technology, these fireplaces stand out as a premier choice for those looking to enhance both comfort and visual appeal in their homes. Whether you choose the Grand-XTS for its expansive heat capabilities or the Supreme-XTS for its luxurious features, either model will transform your living space into a haven of warmth and style.
Top Page Image Contents