Hearth and Home Technologies TS345 installation instructions Installation Instructions

¨

TM

Installation Instructions

Models:

TS345

Square Termination Cap

This chimney termination cap has been tested for use with specific Hearth & Home Technologies Inc. fireplaces. Check with your local building code agency before you begin installation to ensure compliance with local codes, including the need for permits and follow-up inspections. If you encounter any problems regarding code approvals, or if you need clarification of any of the instructions contained here, contact your Hearth & Home Technologies Inc. dealer. For the dealer nearest you, please visit www.hearthnhome.com

Note: An arrow (¨) found in the text signifies change in content.

CAUTION

Sharp Edges

•Wear protective gloves and safety glasses during installation.

WARNING

Fire Risk

•Intended for use with a metal chase top.

Use of combustible materials will cause a fire hazard.

¨

		16"
13-1/4 in.		Minimum
(337 mm)		Open
		Top	Field
		Only
16-1/4 in.		Constructed
		Shroud
(413 mm)
22 in.	Maximum
(559 mm)	Height of 16"
23-1/8 in.
(587 mm)
	3" air space
	from bottom of		Roof Chase
	shroud to top
18 in.	of chase	18¾"
(457 mm)		Minimum
	Dimensions for a Field Constructed Shroud
¨ Figure 1	Figure 2
HeatilHearth & Home Technologies Inc. • TS345 Square Termination Cap • 31446 Rev E • 04/07			1