2.0 OPERATION INSTRUCTIONS
NOTE: If the fireplace has an ON/OFF rocker switch (located near the gas valve), the switch may either be disconnected or turned to the OFF position. Rocker switch is not required for operation of this control.
2.1 Wall switch button operation
On/Off Button
•Button Press: Turns fireplace ON
•Button Press: Turns fireplace OFF
During severe cold weather, homeowners may find that activating the pilot assists in lighting the fireplace. Use the pilot button to switch from
Pilot Button
•Button Press: Turns Pilot to
•Button Press: Turns Pilot to
Fan Speed Button (WSK200 Only)
•Button Press: Turns fan on high
•Button Press: Turns fan on medium
•Button Press: Turns fan on low
•Button Press: Turns fan on off
3.0TROUBLESHOOTING
Effects of Line Power Failure
The operating characteristics of your fireplace may vary during a power failure or power outage. The options listed below will help determine the current state of your system.
Condition (at time of power failure) | Result |
Wall switch is in ON mode with the main | The fireplace will shut down and the display lights in the wall switch will be off. When the |
flame on and has no battery backup or has | power is restored to the system, the display lights will remain unlit and the fireplace will |
dead batteries. | remain off. |
|
|
Wall switch is in OFF mode with the main | The fireplace burner is not currently lit and will stay off. The display lights in the wall |
flame OFF and has no battery backup or | switch will be off. When the power is restored to the system, the display lights will re- |
has dead batteries. | main unlit and the fireplace will remain off. |
Wall switch is in ON mode with the main | The fireplace will shut down and the display lights in the wall switch will be off. When |
flame on and has battery backup. | the power is restored to the system, the main burner flame and display lights will remain |
| off. |
The wall switch is in OFF mode with the | The fireplace will stay off and the display lights in the wall switch will be off. When the |
main flame off and has battery backup. | power is restored to the system, the main burner flame and display lights will remain off. |
4
