C. Wiring

Note: This heater must be electrically wired and grounded in accordance with local codes or, in the absence of local codes, with National Electric Code ANSI/NFPA 70-latest edition or the Canadian Electric Code, CSA C2.1 as appropriate.

All wiring must be done by a qualified electrician. Use appropriate wire to meet local and national codes for rated power consumption.

WARNING

Shock Risk

Improperly grounded outlets could cause electrical shock.

•Always use properly grounded, fused and polarized outlets.

•Always used ground fault protection where required by electrical code.

CAUTION

Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

•A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if, after installation, the circuit trips or fuse blows on a regular basis when the heater is operated. Additional appliances on the same circuit may exceed the current rating of the circuit breaker.

•The heater is wired from the factory with a polarized plug. No provisions have been made for hardwiring.

•For ease of electrical hook up, you may wish to install the heater near an existing outlet. A 15 amp, 120 volt circuit is required.

•Run the cord out the notch of the front face.

•Before plugging the heater into the wall outlet, make sure the control switch is in the “OFF” position.

￿• If the cord does not reach the outlet, a No. 16-AWG minimum wire size extension cord rated for a minimum of 1875 watts may be used. Use minimum length and do not coil cord.

•If installing inside a pre-existing fi replace and if permitted by local codes, an electrician may install an outlet box inside the existing fi replace. Place the outlet in the lower back of the fi rebox.

CAUTION

Disconnect remote controls during your extended absence. This will prevent accidental operation of the heater.

 

 

 

 

Amps

Model

Description

Voltage

Watts

(120/208/240)

CF230E-B

23 in. fi replace/insert

120

1500

12.5

 

 

 

 

 

CF260E-B

26 in. fi replace/insert

120

1500

12.5

Heat & Glo • CF230E-B & CF260E-B • 4038-894 Rev C • 11/05

11

Page 10 Page 12
Page 11
Image 11
Heat & Glo LifeStyle CF260E-B, CF230E-B owner manual Wiring, Amps, Description, Watts 120/208/240
Page 10 Page 12

CF260E-B, CF230E-B specifications

The Heat & Glo LifeStyle CF230E-B and CF260E-B are two exceptional gas fireplace models that embody modern design and cutting-edge technology, suited for contemporary living spaces. Both models deliver an efficient heating solution while enhancing the aesthetic appeal of any room.

One of the standout features of the CF230E-B and CF260E-B is their sleek, clean face design. This minimalist style allows for a seamless integration into various interior design schemes, making them perfect focal points for modern homes. The elegant ember bed radiates warmth and ambiance, creating a cozy atmosphere perfect for gatherings or relaxation.

Both models utilize advanced technology to ensure optimal performance. The IntelliFire Touch ignition system provides an easy-to-use, battery-operated solution for lighting the fireplace. This user-friendly feature not only simplifies operation but also enhances safety by eliminating the need for matches or lighter tools.

In terms of efficiency, the LifeStyle series promotes heat distribution technology that ensures consistent warmth throughout your living space. With adjustable heat settings, users have the flexibility to customize their comfort level while maintaining efficient energy use. The CF260E-B model, in particular, boasts a higher BTU output, making it a suitable choice for larger areas needing substantial heating.

The environmental impact is also a consideration with the LifeStyle fireplaces. Both models are designed to minimize emissions without compromising on performance. Their focus on efficiency aligns with the growing demand for eco-friendly heating solutions.

Another notable aspect of these fireplaces is the customizable flame and ember bed options. Users can choose from a variety of log sets, colors, and flame heights, allowing for personalized design and ambiance to match individual preferences.

Safety is paramount in the design of the CF230E-B and CF260E-B. They come equipped with a safety screen and a reliable shut-off valve to prevent overheating and ensure peace of mind, especially in homes with pets or children.

In summary, the Heat & Glo LifeStyle CF230E-B and CF260E-B models are a blend of aesthetic appeal, advanced technology, and eco-friendly performance. With their stylish designs, efficient heating capabilities, and user-friendly features, they stand out as exceptional choices for homeowners looking to enrich their spaces with warmth and elegance. Whether for intimate settings or larger gatherings, these fireplaces are poised to enhance comfort and sophistication in any home.
Top Page Image Contents