| ||
| Table of Contents |
|
A. | Listings and Code Approvals | 2 |
B. | Service Parts List | 3 |
C. | Installation of the Log Set | 5 |
D. | Lighting Instructions for the “S” Series | 8 |
E. | Maintenance Instructions | 9 |
F. | Troubleshooting - “S” Series | 10 |
| Index | 12 |
| Note: An arrow (∅) found in the text and in the index signifies change in content. |
|
Safety Precautions
1.Please read these installation instructions completely before beginning installation procedures. Failure to follow them could cause an appliance malfunction resulting in serious injury and/or property damage.
2.Always check your local building codes prior to installation. The appliance installation must comply with all local, regional, state and national codes and regulations.
3.NEVER leave children unattended when there is a fire burning in the appliance.
4.This gas appliance is not built for solid fuel. NEVER use gasoline, gasoline type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids in this appliance. Keep any flammable liquids a safe distance from the appliance.
5.DO NOT use chimney cleaners or flame colorants in your appliance.
6.While servicing this appliance, always shut off any electricity or gas to the appliance. This will prevent possible electric shock or burns. Also, make sure the appliance is completely cooled before servicing.
7.To avoid the risk of damaging appliance materials and increasing the risk of spreading a fire, do not use the appliance to cook or warm food.
A.LISTINGS AND CODE APPROVALS
This appliance has been tested and listed in accordance with CSA
Check with your local building code agency prior to installing this appliance to ensure compliance with local codes, including the need for permits and
If you need assistance during installation, please contact your local dealer or the
OGL | Natural Gas | Propane Gas |
|
|
|
Minimum Pressure | 7.0 in. w.c. | 11.0 in. w.c. |
|
|
|
Maximum Pressure | 10 in. w.c. | 14.0 in. w.c. |
|
|
|
Max. Input BTUH | 61,000 | 52,000 |
|
|
|
WARNING!
This appliance and its components are designed to be installed and operated as a system. Any alteration to or substitution for items in this system, unless allowed by these installation instructions, will void the Underwriters Laboratories listing and may void the product warranty. It may also create a hazardous installation. Read through these instructions thoroughly before starting your installation and follow them carefully throughout your project.
2 | 01/04 |
