Connecting the Cable between Indoor Unit and Outdoor Unit

Connectionmethod ofthe connecting cable(Example)

(1)Remove two-caps on the conduit panel.

(2)Make a hole appropriate for the passage of connection cable through on cap by tool.

(for low voltage line)

(3)Pass the connecting cable through the hole.

(4)Properly connect the cable on the terminal block.

(5)Fix the connection cable with cord clamp provided on the unit not to have strain at the terminal when the connection cable is pulled outside up to a 35 pound weight.

(6)Wind the vinyl tape round the connecting cable for sealing between the surface of the connection cable and cap.

(7)Finally, Fix the cap to the conduit panel.

WARNING: Loose wiring may cause the termi- nal to overheat or result in unit malfunction. A

Lock nut

G

Terminal block

Cord clamp

Cap(Reuse)

Hole

(for low voltage line) Cap(Remove)

Taping

(for sealing)

fire hazard may also exist. Therefore, be sure all wiring is tightly connected.

When connecting each power wire to the corresponding terminal, follow instructions "How to connect wiring to the terminals" and fasten the wire tightly with the fixing screw of the terminal plate.

How to connect wiring to the terminals

For strand wiring

(1)Cut the wire end with a wire cutter or wire-cutting pliers, then strip the insulation to expose the strand wiring about 10mm(3/8").

(2)Using a screwdriver, remove the terminal screw(s) on the terminal plate.

(3)Using a round terminal fastener or pliers, securely clamp each stripped wire end with a round terminal.

(4)Position the round terminal wire, and replace and tighten the terminal screw using a screwdriver.

Power supply line

Conduit panel

Low voltage line

(1ø , 230/208V)

 

(connecting cable)

High voltage

Strand wire

10mm(3/8")Strip

Round

 

terminal

 

Low voltage

 

 

Loosening the

Fastening the

terminal block

wire tightly

screw

 

Connecting cable

Service Manual 27

Page 27
Image 27
Heat Controller DMH24DB-1 manual Connection method of the connecting cableExample, How to connect wiring to the terminals

DMC24DB-1, DMH24DB-1 specifications

The Heat Controller DMH24DB-1 and DMC24DB-1 units stand out in the realm of climate control solutions, combining advanced technology with user-friendly features to enhance indoor comfort. These air conditioning systems are designed to provide efficient cooling and heating for both residential and commercial spaces.

One of the main features of the DMH24DB-1 and DMC24DB-1 is their inverter technology. This cutting-edge technology allows the units to adjust the compressor speed according to the cooling demands of the space, leading to significant energy savings. By operating at variable speeds instead of a fixed setting, the inverter provides a more consistent temperature, reduces wear and tear on components, and minimizes energy consumption, which can translate to lower electricity bills.

Both models offer a sleek and modern design, making them not only functional but also aesthetically pleasing. The indoor units are designed for easy placement in various environments and can blend seamlessly with any decor. In addition, they are relatively quiet during operation, with low noise levels that enhance indoor comfort without disturbing daily activities.

Another notable feature is the integrated smart control system that allows users to operate the units via a smartphone or tablet. This capability offers the convenience of adjusting settings from anywhere, ensuring that your space is always at the desired temperature when you arrive home or the office. The app can provide insights into energy consumption, allowing users to make informed decisions about their heating and cooling usage.

The DMH24DB-1 and DMC24DB-1 models also boast efficient filtration systems that help improve indoor air quality. The filters are designed to capture dust, pollen, and other allergens, contributing to a healthier living or working environment. This is particularly important for individuals with allergies or respiratory issues.

With a variety of cooling and heating modes, these units can cater to different user preferences and seasonal demands. Features like turbo mode are designed to quickly bring a space to the desired temperature, while the eco-friendly refrigerant helps reduce environmental impact.

In summary, the Heat Controller DMH24DB-1 and DMC24DB-1 units are high-performance air conditioning systems equipped with advanced technologies and practical features, making them an excellent choice for anyone seeking efficient and reliable climate control solutions. Their energy efficiency, enhanced air quality, and smart technology integration position them as leaders in the market.