1. Thread the 6 leveling feet into
the holes around the bottom
of the base. (Figure 1)
2. Attach the anged column
to the base with (4) M8
bolts, using the supplied hex
wrench. (Figure 1)
3. Mount the lamp to the terminal
box with M6 screw and nut.
(Figure 2)
4. Connect the terminal box to
the upper column with (4)
M5 bolts. Be sure to feed the
attached power cord into the
upper column. (Figure 3)
5. Connect the center column to
the upper column by screwing
clockwise. Do not over-
tighten.
6. Insert the cable plug into the
cable socket. Feed the cord
through the lower column and
out the bottom of the base.
Connect the center column to
the lower column byscrewing
clockwise. Do not over-
tighten. (Figure 4)
7. Pull gently on the cable at the bottom of the base to keep
it taut. Fix the cable to the base with the cable clamp and
(2) M4 screws.
(Figure 5)
ASSEMBLING THE UNIT (Follow diagrams below)
SPECIFICATIONS
MOUNTING AND OPERATING INSTRUCTIONS
Model: IRPH15SS
Voltage: 120V AC
Emitter (Lamp): IRRL15120
(Medium wave infrared)
Power : MAX 1500W
Height: 82 inches (2100mm)
Width: 24 inch base (600mm)
Installation & Operation Manual Infrared Electric Patio Heater Heat Controller
4
Congratulations on your purchase of the Comfort-Aire®
Electric Portable Infrared Patio Heater.This heater utilizes
medium-wave technology that heats people and objects,
not the air, and is unaffected by wind. For best results and
your safety, follow the instructions carefully. Do NOT modify
this product in any way as the manufacturer will not accept
liability for improper use.