Operating Instructions
Sleep
Mode
1. Press the SLEEP MODE AUTO BUTTON to set the time when you want the unit to stop automatically.
2.The timer is programmed in
To alter the time period in steps of 1 hour, press the SLEEP MODE AUTO BUTTON while aiming at air conditioner.
3.Make sure the Timer LED lights up.
To cancel the sleep mode, press the SLEEP MODE AUTO BUTTON several times until the Timer LED lights off.
NOTE
•The sleep mode will operate indoor fan at slow speed in cooling mode.
In cooling mode or healthy dehumidification mode:
The setting temperature will rise automatically two times by 1°C(2°F) over next consecutive 30 minutes [2°C(4°F) in 1 hour] for a comfortable sleep. Now this will be the final setting temperature as long as sleep mode is functioning.
Setting
the
Current
Time
1. | Time can be set only when you press the RESET BUTTON. Having replacing the batteries, | ||
| you should press the RESET BUTTON to reset the time. Press the Start/Stop button. | ||
2. | Press 2nd F button and check if | icon is on. | |
3. | Press the TIME SETTING BUTTONS until the desired time is set. | ||
4. Press the TIME SET/CANCEL BUTTON. | CANCEL | ||
| |||
SET
NOTE
Check the indicator for A.M. and P.M.
Timer
Setting
1. Make sure to set current time correctly on the display of the remote controller.
ENGLISH
2. Press 2nd F button.
ON OFF
3. Press the ON/OFF TIMER BUTTONS to turn timer on or off.
4. Press the TIME SETTING BUTTONS until the desired time is set.
CANCEL
5. To set the selected time, press the TIMER SETTING BUTTONS aiming the remote controller at the | SET | ||
|
|
| |
signal receptor. |
|
| |
To cancel the timer setting |
|
| |
Check if | icon is off. | CANCEL |
|
|
| ||
Press the TIMER CANCEL BUTTON aiming the remote controller at the signal receptor. 
SET (The timer lamp on the air conditioner and the display will go off.)
NOTE
Select one of the following four types of operation.
Delay off timer | Delay on timer | Delay off and on timer | Delay on and off timer |
Owner's Manual 13
