Operating Instructions
Healthy
Dehumidification
Operation
Healthy
Dehumidification
During Healthy Dehumidification Operation
❏If you select the dehumidification mode on the OPERATION MODE SELECTION BUTTON, the product starts to run the dehumidification function. It automatically sets the room temperature and airflow volume to the best condition for dehumidification, based on the sensed current room
temperature.
In this case, however, the setting temperature is not displayed on the remote controller and you are not able to control the room temperature either.
❏During the healthy dehumidification function, the airflow volume is automatically set according to the optimization algorithm responding to the current room temperature status, so that the room condition is kept healthy and comfortable even in the very humid season.
To run the healthy dehumidification mode follow steps 1, and 2 and 4 (See operation mode)
Jet
Cool
Operation
Jet cool function can be used to cool the room quickly in hot summer. When this function is turned on, the air conditioner runs in cooling operation mode with super high fan speed and 18°C(64°F) setting temperature for 30 minutes for fast and effective cooling.
You can activate this operation by pressing the JET COOL BUTTON.
To change from jet cool mode to high fan speed cooling mode, press the JET COOL BUTTON or INIDOOR FAN SPEED SELECTOR BUTTON or the ROOM TERPERATURE SETTING BUTTON again.
Auto
Clean
❏During auto clean function, moistures left in indoor units after cooling operation or healthy dehumidification operation can be removed.
AUTO CLEAN
NOTE
1.Press the AUTO CLEAN BUTTON to activate this function.
2.Now whenever the unit is turned off, the indoor fan is still running for about 30 minutes internally without cooling or dehumidification operation. Also the louver is closed.
3.This dries up any remains of moisture & cleans the unit internally.
4.If you press AUTO CLEAN BUTTON again during operation, this function is cancelled.
❏During auto clean function, only START/STOP BUTTON and AUTO CLEAN BUTTON can be used.
Owner's Manual 11
