Operating Instructions
Jet
Cool/Heat
Operation
Jet cool function can be used to cool the room quickly in hot summer. When this function is turned on, the air conditioner runs in cooling operation mode with super high fan speed and 18°C(64°F) setting temperature for 30 minutes for fast and effective cooling.
Similarly, jet heat function (available only in some models) warms up the room quickly by operating at super high fan speed and 30°C(86°F) setting temperature for 60 minutes.
You can activate this operation by pressing the JET COOL BUTTON.
To change from jet cool mode to high fan speed cooling mode, press the JET COOL BUTTON or INIDOOR FAN SPEED SELECTOR BUTTON or the ROOM TERPERATURE SETTING BUTTON again.
NOTE
•Jet cool function cannot be activated during heating or auto changeover operations.
•You can use jet heat function by pressing JET COOL BUTTON for heating operation.
Auto
Clean
❏During auto clean function, moistures left in indoor units after cooling operation or healthy dehumidification operation can be removed.
AUTO CLEAN
NOTE
1.Press the AUTO CLEAN BUTTON to activate this function.
2.Now whenever the unit is turned off, the indoor fan is still running for about 30 minutes internally without cooling or dehumidification operation. Also the louver is closed.
3.This dries up any remains of moisture & cleans the unit internally.
4.If you press AUTO CLEAN BUTTON again during operation, this function is cancelled.
❏During auto clean function, only START/STOP BUTTON and AUTO CLEAN BUTTON can be used.
