COMPLETE THE INSTALLATION
❒Stuff the wires into the junction box. Make sure none of the wires get pinched.
Slide the fixture onto the |
| |
mounting screws and | Junction | |
tighten nuts. | ||
Box |
❒Install one 100W max. light bulb, or three 60 W bulbs in candelabra style.
❒Install the fixture top. Secure with decorative screws.
❒After completing the tests on page 5, caulk fixture mounting surface with silicone weather sealant.
Model 4193 Glass Installation
Corner
Guides
Rubber Bumpers
❒Model 4193 only: install the six pieces of glass by sliding them down as shown. The glass panels should rest upon the corner guides on each side, and against the rubber bumpers at the bottom.
Note: As with any glass, handle with care.
