-5-
598-1067-03
12345678
Removescrewto
open access door
BackofChime
4.Tochangethecode,either(Formodelswith2 pushbuttons,changecode
setting in both push buttons to match chime.):
• Addajumpertothesamelocationonboththepushbuttonandthechime
or...
• Removeajumperfromthesamelocationonboththepushbuttonandthe
chime or...
• Moveajumperonthepushbuttonfromonelocationtoanother.Movethe
correspondingjumperonthechimetomatchthenewlocationinthepush
button.
Example: Move jumper at location “5” to location “4” on both the push
button and the chime.
Note:Codepositions1through7mustbeexactlythesameforboththe
pushbuttonandchimeforthissystemtofunction.
Note:Unitwillcome factorysetwithjumpers inlocations5, 6,and7on the
push button and on the chime (see Figure 5).
Therange of the wireless chime can vary with location, temperature, and
battery condition.
* Code Settings 1-7
MustMatchBoth Push
ButtonandChime
InsidePush
Button
Note: Some models might require the use of
tweezerstoremoveandreplacethejumpers.
Figure 5
12345678