-2- 598-1109-06
5. Mount push button. Useeitherscrewsordoublesided
tape to mount push button.
• ScrewMounting:Tomount withscrews,remove
backofcasebypushingintabonbottomwithasmall
screwdriver(seeFigure1).Note: Remove material in
screwholes(ifneeded)beforemountingwithscrews.
Attachbackofcasetodoorjamborwall(seeFigure
4). Snap front of push button on.
• Tape Mounting:Whenattachingpushbuttonusing
double sided tape, make sure the surface of the door
jamborwallisclean.
6. Mount chime. Determine mounting location.
 Therearethree differentwaysto mountthechime
depending upon the model of chime purchased. De-
terminewhichmodelyoupurchasedbelow.Mountthe
chime according to the instructions for your chime.
Basic Chime with Separate Chime with Attached
Chime Decorative Cover Decorative Cover
Style of push button and chime may vary from illustration.
Figure 4