Heath Zenith 598-1282-02 manual Jumper On Two Top Pins for Electronic Chime

7.If you have an electronic chime, move the jumper on the back of your push button from the two bottom pins to the two top pins (see Figure 5). Press push button to test again.

8.If your chime still does not operate correctly, see Troubleshooting, page 7.

Jumper On Two

Bottom Pins

for Mechanical

Chime

Jumper On Two Top Pins for Electronic Chime

Figure 5 - Determining Correct Jumper

Position (Back of Push Button)

598-1282-02