Troubleshooting Guide

SYMPTOM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

 

Lamp or appliance

1.

Circuit breaker is tripped or

1.

Reset circuit breaker or replace

does not come on.

 

turned off or fuse is blown.

 

fuse.

 

2.

Switch on lamp or appliance

2.

Verify switch on lamp or appliance

 

 

is turned off.

 

is turned on.

 

3.

Lamp or appliance is defec-

3.

Test using different lamp or appli-

 

 

tive.

 

ance.

 

4.

Interrupted by another de-

4.

Change channels on remote con-

 

 

vice.

 

trol and receiver units.

 

5.

Signals from remote control

5.

Check for metal objects that could

 

 

are being blocked, or remote

 

block the signal, or reposition the

 

 

control is out of range.

 

remote control.

 

6.

Weak battery in the remote

6.

Check battery charge and replace

 

 

control.

 

if necessary.

 

7.

Dip switches on remote con-

7.

Verify dip switch settings on remote

 

 

trol and receiver units do not

 

control and receiver units are set

 

 

match.

 

the same.

 

8.

Receivers are too close to-

8.

Increase distance between receiv-

 

 

gether.

 

ers to 10 feet (minimum).

 

 

 

 

 

Lamp or appliance

1.

Switching modes too quickly.

1.

Wait 1 to 2 seconds before swiching

does not turn off.

 

 

 

modes.

 

2.

Same as 5, 6, 7, and 8 above.

2.

Same as 5, 6, 7, and 8 above.

 

 

 

 

 

Lamp or appliance

1.

Short term power line failure.

1.

Press OFF button on remote.

comes on randomly.

2.

Another device on the same

2.

Change channels on remote con-

 

 

channel.

 

trol and receiver units.

 

 

 

 

 

Technical Service

Please call 1-800-858-8501 (English speaking only) for assistance before

returning product to store.

If you experience a problem, follow this guide. You may also want to visit our Web site at: www. hzsupport.com. If the problem persists, call* for assistance at 1-800-858-8501,7:30 AM to 4:30 PM CST (M-F). You may also write* to:

HeathCo LLC

P.O. Box 90004, Bowling Green, KY 42102-9004 ATTN: Technical Service

*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.

No Service Parts Available for these Products

Regulatory Information

This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance could void the user’s authority to operate the equipment.

WARNING: This product contains chemicals known to the State of California to cause cancer or birth defects, or other reproductive harm.

598-1304-01

Page 4
Image 4
Heath Zenith 598-1304-01 manual Troubleshooting Guide, Technical Service, Control If necessary Dip switches on remote con