Chime Replacement Installation

IMPORTANT: Proper installation requires a diode on the front door push button. See Diode Installation Instructions (page 5) after completing steps 1 through 13 below.

Note: Electrical work must be in accordance with national and local electrical codes. If in doubt, consult a qualified electrician.

- -	598-1313-00

Cover Pin

Test Button

Volume Control

1.	Verify transformer power rating. Power must be supplied from
	a 16 Volt AC, 10 Watt or a 16 Volt AC, 15 Watt transformer
	(Heath®/Zenith models 122C, 121AC, or 125C).
2.	Remove cover from existing chime.
3.	Label all wires before disconnecting. Using masking tape, mark
	each wire according to existing chime terminal markings.
	•	“F” – Front Push Button Wire
	•	“T” – Transformer Wire
	• “R” – Rear Push Button Wire (Note: Some installations may
		not include rear door push button.)
4.	Disconnect all wires from existing chime.
5.	Remove existing chime base from wall.
6.	Determine proper chime base orientation. The chime cover
	style will determine orientation.
7.	A cover pin is installed on two sides of the chime base. After
	determining correct orientation, remove, turn over, and reinstall

Base Orientation Marking

Transformer and

Push Button Wire

Connections

Wire Entrance Hole

Front Door Tune Selection Switch (3 Selections or 10 Selections

– Depending on Model)

the cover pin located on top of chime base (see Figure 1).

Continued

Figure 1 - Electronic Chime Identification

(2300 Base Shown)

Illustrations may vary from actual chime unit.

598-1313-00 specifications

The Heath Zenith 598-1313-00 is a robust and innovative wireless doorbell system designed to enhance home security and convenience. Known for its sleek design and user-friendly features, this doorbell system is ideal for homeowners seeking a modern solution for their front entryway.

One of the primary features of the Heath Zenith 598-1313-00 is its impressive wireless range. With the ability to operate effectively at distances of up to 150 feet, homeowners can install the doorbell without concern about connectivity issues. This extended range ensures reliable communication between the doorbell and the receiver, even in larger homes.

Another significant characteristic of this doorbell system is its wide variety of chime melodies. The Heath Zenith 598-1313-00 offers multiple sound options, allowing users to personalize their doorbell chime according to their preferences. With various tones and melodies, homeowners can choose a sound that resonates with their style, making it not only functional but also decorative.

In addition to its sound options, this doorbell is equipped with LED indicators that provide visual alerts for visitors. This feature is especially beneficial for those who may have hearing impairments or live in noisy environments. The bright LED lights ensure that homeowners are always aware when someone is at the door, adding an extra layer of accessibility to the system.

The Heath Zenith 598-1313-00 utilizes advanced wireless technology that minimizes interference from other electronic devices. This ensures a clear and consistent signal, reducing the chances of missed alerts. Moreover, it operates on a low-frequency band, which helps in maintaining a stable connection even in densely populated areas.

Installation of the Heath Zenith 598-1313-00 is straightforward, requiring no complex wiring. The doorbell can be easily mounted alongside the transmitter at the entrance, while the receiver can be placed anywhere within range inside the home. This flexibility allows homeowners to strategically position the receiver for optimal hearing.

In terms of power, the Heath Zenith 598-1313-00 is designed for energy efficiency. It typically uses standard batteries, which not only ensure longevity but also make it easy to replace when necessary. The device is also weather-resistant, making it suitable for outdoor use in various climates, which is crucial for maintaining functionality throughout the year.

Overall, the Heath Zenith 598-1313-00 presents an ideal combination of style, functionality, and innovation. With its impressive wireless range, customizable chime options, visual alerts, and easy installation, it stands out as a valuable addition to any home looking to enhance its entryway and improve access control.

Heath Zenith 598-1313-00 manual Chime Replacement Installation

Models: 598-1313-00