Heath Zenith AND WIRING THE 6108 WALL SWITCH, TYPICAL 3-WAYINSTALLATION, SWITCH 1ST IN CIRCUIT

SEE PAGES 3 THROUGH 5 FOR DETAILED INSTRUCTIONS FOR INSTALLING

AND WIRING THE 6108 WALL SWITCH.

TYPICAL 3-WAY INSTALLATION

FROM	WHITE		WHITE	WHITE
POWER	BLACK	*COMMON		*COMMON
SOURCE
			RED
			(In Wall)
			BLACK	BLACK
GREEN
(Ground)

6108 SWITCH 1ST IN CIRCUIT

WHITE	WHITE	WHITE
FROM		ADD JUMPER WIRE
POWER
SOURCE		*COMMON
BLACK BLACK	BROWN	RED
		(In Wall)

GREEN (Ground)

	RED	BLACK	BLACK
6108	(From 6108)		EXISTING
			3-WAY SWITCH

6108 SWITCH 2ND IN CIRCUIT

	WHITE		WHITE	WHITE
FROM	ADD JUMPER WIRE
POWER
SOURCE		*COMMON
	BLACK	RED	BROWN	BLACK
		(In Wall)
		BLACK	RED
		EXISTING	(From 6108)	6108
GREEN		3-WAY SWITCH
(Ground)

BLACK

*COMMON-Used for illustrative purposes only. CheckYour Switch. The common may be in a different location, depending on the brand of your switch.

RED is used to represent the second wire between two standard three-way switches. This may not be the color used in all installation. If you are not sure about your wiring, call an electrician for instal- lation help. There is also a RED wire on the 6108 switch. Check the instructions above closely and do not confuse the two.

2 598-1233-02