| Weatherproof Long Range |
| Wireless Chime with |
Model | Chime Extender |
|
This package includes (Style of transmitter and chime may vary from illustration):
•Weatherproof Battery Operated Wireless Chime
•Extension Transmitter
•Hardware Pack
NOTE: This chime requires 3 “D” alkaline batteries for the chime and 4 “AAA” alkaline batteries for the transmitter (Not Included).
Your ACE® Chime Extender allows you to add doorbell coverage to anywhere on your property, up to 400 feet from extension transmitter, without the need to run additional wires. The Chime Extender “listens” for your existing doorbell to ring, then transmits a radio frequency signal to the Weatherproof Long Range chime unit.
1.Install batteries in transmitter and chime.
1.Remove battery cover from extender transmitter by pressing on the cover with your thumb, then slide cover off as shown Figure 1.
2.Install 4 type “AAA” batteries (not provided). Make sure batteries are oriented properly as shown in bottom of battery compartment (see Figure 2).
3.Remove screw on chime battery compartment. Using integrated finger tab, slide cover downward and lift up to remove cover (see Figure 3).
4.Install 3 type “D” batteries (not provided). Make sure batteries are oriented properly as shown in bottom of battery compartment (see Figure 4).
12345678
Figure 1
Removable Microphone
Jumpers
Test Button
Wire Routing Slot
Wire |
Terminals |
Battery
Orientation
Microphone
Sensitivity
Adjustment
Figure 2
© 2007 |
