Green sensor |
| |
wire to Green or | Red sensor | |
bare fixture wire | ||
wire to Black | ||
| ||
| fixture wire | |
White sensor |
| |
wire to White | Black sensor | |
fixture wire | ||
wire to Black | ||
| ||
| post wire |
TESTING
Turn on the circuit breaker and light switch.
Note: Sensor has a 1 1/2 minute warm up pe- riod before it will detect motion.When first turned on wait 1 1/2 minutes.
Avoid aiming the control at:
•Pools of water or objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.
•Areas where pets or traffic may trigger the control.
•
Green sensor |
| White sensor |
wire to Green or |
| |
| wire to White | |
bare post wire |
| |
| post wire | |
|
| |
SPECIFICATIONS |
Range | Up to 30 ft. (9.1 m) |
| [varies with surround- |
| ing temperature] |
Sensing Angle | Up to 150° |
Sensor Capacity | Up to 360 Watts (3.0 |
| A.) Maximum Tungsten |
| Incandescent |
Power |
|
Requirements | 120 VAC, 60 Hz |
Operating Modes | TEST, AUTO and |
| MANUAL OVERRIDE |
Time Delay | 1, 5, 20 minutes |
Sensitivity | Adjustable |
DualBrite® Timer | Off, 3, 6 hours, Dusk- |
|
HeathCo LLC reserves the right to discon- tinue products and to change specifications at any time without incurring any obligation to incorporate new features in products pre- viously sold.
150°
5 ft.
(1.5 m)
30ft.
(9.1 m)
Maximum Range | Maximum |
| Coverage Angle |
The detector is less sensitive to motion di- rectly towards it and more sensitive to across motion.
MotionMotion
Sensor
Least Sensitive | Most Sensitive |