Heath Zenith SL-4303 warranty Test, Auto, Manual Mode, Operation

Motion Sensing Porch Light

Meets the ENERGY STAR® guidelines when DualBrite® func- tion is off.

TEST

Set the ON-TIME switch		ON-TIME
on the sensor to TEST.
	TEST 1 5 10 MIN
AUTO
Set ON-TIME switch to		ON-TIME
1, 5, or 10 minutes.
	TEST 1 5 10 MIN

MANUAL MODE

SL-4303

Features

•Light comes on when motion is detected.

•Automatically turns light off.

•Half power Accent lighting.

•Photocell keeps the light off during daylight hours.

This package includes:

• Porch Light
•	Easy to use Universal Mounting Bracket
•	Mounting Hardware

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position.

1 Second OFF

then...

• Wire Nuts

• Lens Shield

Requirements

•The light control requires 120 volts AC.

•If you want to use Manual Mode, the control must be wired through a switch.

•Some electrical codes require installation by a qualified electrician.

OPERATION

Mode:	On-Time	Works: Day Night
Test	5 Sec	x	x
Auto/	1, 5, or 10 min		x
Accent	Off, 3, 6 Hr, to Dawn		x
Manual	Until Dawn*		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

... back on.

Mode Switching Summary

	TEST	ON-TIME Switch at 1, 5, or
		10 minutes
	AUTO		Flip light switch off
			for one second then
MANUAL MODE			back on*

*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode.

Before installation,record the model number listed inside the fixture.Attach receipt in case of possible warranty issues.

Model Number:

© 2008 HeathCo LLC 598-1348-00