Model SL-5666

100 Watt H.P.S.

Dusk-to-Dawn Security Light

Installation Instructions With Two Piece Arm

READ ALL INSTRUCTIONS CAREFULLY BEFORE BEGINNING INSTALLATION.

NOTE: All wiring must be run in accordance with the National Electrical Code (Canadian Electrical Code in Canada) through conduit or another acceptable means. Contact a qualified electrician if there is any question as to the suitability of the system.

Lamp in Fixture Contains Mercury. Dispose According to Local, State, or Federal Laws.

WARNING: Turn power off at the circuit breaker or fuse.

1.Select a location on a flat wall with structurally sound wood and from 10 to 25 feet (3 to 7.6 m) from the ground. The wood should be at least one inch thick to safely secure the fixture.

2.Slide the curved section of the mounting arm into the mounting bracket. Tighten the bolts on the mounting bracket evenly.

3.Using the mounting arm and bracket as a guide mark four mount- ing holes. We suggest drilling 3/16" (4.8 mm) pilot holes for the lag screws.

4.Mount the arm and bracket using four lag screws and washers provided.

5.Place a ring of silicone caulk around mounting arm (see illustra- tion). Slide the straight section of the mounting arm on to the curved section aligning the predrilled holes.

6.Secure the two sections with two bolts, nuts and four washers provided. Place silicone caulk on top of the bolts and washers to prevent water from entering.

7.Thread your outdoor cable or flexible conduit through the mount- ing arm.

8.Loosely connect the mounting strap to the fixture using two bolts provided.

9.Slide the fixture on to the mounting arm until the fixture comes to a stop. Secure the fixture to the mounting arm by tightening the two mounting strap bolts.

10.Connect the fixture wires to the service wires using the wire nuts provided (black to black and white to white). Push the connec- tions as far as possible into the straight arm.

15.Align the photocontrol (it will only plug-in one way). Plug it in and twist clockwise until it stops.

To test operation during daylight, cover the photocontrol with a small box. Turn on the power. Not all photocontrols are alike. Some may have a time delay of a few minutes, others will turn on as soon as power is applied. The light will take up to ten minutes to reach full brightness. Uncover the photocontrol and your unit will operate automatically—on at dusk, off at dawn.

Photocontrol

Mounting

Arm

Silicone

Caulk

Mounting Strap

Ground

Screw

Lens/Reflector

Assembly

Lag Screw (4)

11. This fixture must be grounded. Connect the service ground under

Mounting

the head of the green ground screw and secure to the mounting

Bracket

 

strap.

Flat Washer (10)

 

12. Install the lens/reflector assembly with two screws and washers provided.

13.Screw in the 100 watt H.P. Sodium type S54 lamp provided.

14.Loosen the screw in the center of the photocontrol socket two turns. Twist the socket so that the arrow points north. Note: There is a stop to prevent the socket from turning all the way around. If you have trouble turning the socket, try turning it the other direc- tion. Retighten the screw in the center of the socket.

© 2008 HeathCo LLC

598-1054-04

Page 1 Page 2
Page 1
Image 1
Heath Zenith installation instructions Model SL-5666 Watt H.P.S Dusk-to-Dawn Security Light
Page 1 Page 2

SL-5666 specifications

The Heath Zenith SL-5666 is a sophisticated and reliable outdoor motion sensor light that combines both functionality and aesthetics. Designed for security and convenience, this product serves as an essential addition to any home or business looking to enhance safety in their surroundings.

One of the standout features of the SL-5666 is its adjustable motion detection. It boasts a range of up to 70 feet, allowing for significant coverage of outdoor areas. The sensor is capable of detecting movement within a 180-degree range, effectively capturing any motion activity within its vicinity. This feature is particularly useful for alerting homeowners to potential intruders or unexpected visitors.

The SL-5666 incorporates dual technology with both motion sensor and traditional lighting. This dual function not only enhances security but also improves energy efficiency. The light operates on a sensor-activated basis, ensuring that it only illuminates when movement is detected. This reduces electricity consumption and prolongs the lifespan of the bulbs used.

In terms of illumination, the Heath Zenith SL-5666 is equipped with powerful LED lights that provide bright, clear visibility. The LED technology is not only energy-efficient but also provides a longer-lasting lighting solution as compared to traditional incandescent bulbs. The light output is adjustable, allowing users to customize brightness settings based on specific needs or preferences.

Another key characteristic of the SL-5666 is its durable and weather-resistant design. The fixture is built to withstand varying outdoor conditions, including rain, snow, and extreme temperatures. This ensures that the motion sensor light remains functional and effective year-round, regardless of the weather.

Ease of installation is yet another advantage of the Heath Zenith SL-5666. The product comes with comprehensive instructions, making it accessible for most DIY enthusiasts. Additionally, the sleek and modern design blends seamlessly with different architectural styles, adding to the visual appeal of outdoor spaces.

Overall, the Heath Zenith SL-5666 offers a winning combination of advanced technology, reliability, and design, making it an excellent choice for anyone looking to improve outdoor lighting and security. Whether for homes, garages, or business premises, this motion sensor light promises to deliver on performance and peace of mind.
Top Page Image Contents