Heath Zenith SL-6196, SL-6143 manual Push Button Battery Replacement

¥Ding (one note tune)

Push Button: Add a jumper to location 8.

¥Ding-Dong(two note tune)

Push Button: Remove jumper from location 8.

Chime: Remove jumper from location 8.

¥Westminster (Eight note tune) (Available on selected Heath¨/Ze- nith chimes)

Push Button: Remove jumper from location 8.

Chime: Add a jumper to location 8.

Note: All models have both front and back door tune capabilities. You may purchase any Heath¨/Zenith wireless push button for a second entrance. We recommend the back door use the Ding tune and the front door use the Ding-Dongtune (or Westminster tune, available on selected Heath¨/Zenith chimes). Models that include two push but- tons will come factory set for front and back doors. Decals on the rear of the push button will indicate its setting.

Remove screw to open access door

Back of

Chime

1 2 3 4 5 6 7 8

Push Button Battery Replacement

Install an alkaline type A23 12 Volt bat- tery. See diagram inside push button for correct battery orientation.

12	* Code Settings 1-7 Must
345	Match Both Push Button
67	and Chime
8

Tune Setting	Inside	Tune Setting
	Push
(Not used on	Button
all models)

Note: Some models might require the use of tweezers to remove and replace the jumpers.

595-5649-05 -3-