Decorative Wireless Doorbell
SL-6155 and SL-6250 Series
This package includes (Style of push button and chime may vary from illus- tration):
¥Wireless chime
¥Wireless push button w/battery
¥Hardware pack
You'll need to buy 3 "D" alkaline batteries for the chime. In typical use, alkaline batteries will last up to three years.
1.Install alkaline type A23 12 volt push button bat-
tery. Remove back of case by pushing in tab on bottom with a small screwdriver. Make sure battery is oriented properly (see page 3).
See page 2 for help removing the chime case.
2. Install 3 alkaline "D" batteries.
Make sure batteries are oriented properly.
3.Test range. Temporarily position chime and push button where you want them mounted. Press push button to verify chime and push button work properly. If chime does not sound, see Troubleshooting.
4.Mount push button and chime.
Use either screws or double sided tape to mount push button.
To mount with screws, remove back of case by push- ing tab on bottom with a small screwdriver.
Attach back of case to door jamb or wall. Snap front of button on.
When attaching push button using double sided tape, make sure the surface of the door jamb or wall is clean.
© 2003 DESA Specialty Productsª |
