Heath Zenith SL-6157 manual Tune Settings, Transmitter Battery Replacement

Tune Settings

Your Heath¨/Zenith wireless chime has different selectable tunes: Ding (one note), Ding-Dong(two note), or Westminster (eight note) (Available on se- lected Heath¨/Zenith chimes). The factory setting is for the Ding-Dong tune (or Westminster, when available). This tune can be changed by following the instructions below.

¥Ding (one note tune)

Transmitter: Add a jumper to location 8.

¥Ding-Dong(two note tune)

Transmitter: Remove jumper from location 8.

Chime: Remove jumper from location 8.

¥Westminster (Eight note tune) (Available on selected Heath¨/Zenith chimes)

Transmitter: Remove jumper from location 8.

Chime: Add a jumper to location 8.

Note: All models have both front and back door tune capabilities. You may purchase any Heath¨/Zenith wireless push button for a second entrance.

Remove screw to open access door

Back of

Transmitter Battery Replacement

Install four alkaline AAA batteries. See diagram inside push button for correct battery orientation.

Chime 12345678

Tune Setting (Not used on all models)

12345678

Inside

Transmitter

*Code Settings 1-7 Must Match Both Transmitter and Chime

Tune Setting

Note: Some models might re- quire the use of tweezers to re- move and replace the jumpers.

595-5345-06 -5-