Hellenbrand manual ProMate 6.5 Series Simplicity with High Performance

ProMate 6.5 Series - Simplicity with High Performance

The Hellenbrand ProMate 6.5 Electronic On Demand System incorporates all of the best engineering features of our ProMate

6.0Series with additional “High Performance” designs, that provides higher capacities or more simply put “better gas mileage” and less salt used.

We have incorporated small but critical design features learned from months of testing to increase the operating efficiencies (grains of softening capacity per lb. of salt used) to nearly 5,000 grains per lb. of salt using counter-current or upflow regeneration.

•The PM6.5 uses upflow or counter-current regeneration, passing the regenerate through unused resin at the bottom of the tank, pushing the hardness minerals up through the exhausted portion of the resin bed for a more efficient regeneration.

•This allows the water leaving the tank during service to pass through the most efficient zone at the bottom of the tank.

•Variable reserve automatically adjusts to your changing water usage patterns for each day of the week, providing added savings.

•This provides better salt efficiencies, better water quality and less water used for regeneration.

Regenerant
In
	Regenerant
Hardness	In
Minerals	Hardness
Out
	Minerals
	Out
	Ion Exchange
	Resin
Marginally	Highly
Regenerated	Regenerated
Zone	Zone
Downflow	Upflow
(Cocurrent)	(Countercurrent)

ProMate 6.5; Elegant Simplicity, Raw Power, Premium Resin

Superior Flow Technology

Hellenbrand’s distribution plate has 56% more surface area on 10” diameter systems than standard systems with a cone type distributor, and runs the full width of the tank diameter for significantly improved performance.

•Improved bed expansion in backwash provides better cleaning of the bed.

•Less water is required to regenerate.

Array	% Increase of open
(starting at	area with respect to
center)	Array No. 1
Array No. 1	-
Array No. 2	100%
Array No. 3	200%
Array No. 4	300%
Array No. 5	400%
Array No. 6	500%

Premium 10% Resin

•We use premium 10% crosslinked resin vs. most of our competitors that use 8% or less.

What does this mean?

•10% resin is used for a lot of commercial applications, because it is stronger and lasts longer. It resists mushing and jelling from chemicals and physical breakdown.

•Damaged resin means you will use more salt and waste more water when recharging the resin for softening.

•You also have better pressure over the life of your softener.

Fewer Parts = Fewer Problems

•Modular Design

•Non-Corrosive Valve Body & Internals

•One Piece Seal Assembly

•No Nuts, Bolts, Screws or Micro-Switches

•Disassemble and Reassemble in Minutes

Vortech™ 10” Mid Plate Standard Tank