Hellenbrand PM6.O-IC-2.0 Series manual Model Number Max. Service Backwash Flow Rate GPM

Better in the kitchen. Better in the bathroom. Better in the laundry.

NEW! IC-2.0 Technology Upgrade

The new IC-2.0 technology marks the first major upgrade to the original and proven 1992 patented Iron Curtain System. Called the most reliable and best iron and sulfur (rotten egg odor) system design by leading water treatment professionals in the industry. This new technology gives you:

•Individual factory by-pass valves for both the aeration tank and filter tank assemblies.

•Reduced installation materials.

•Reduced installation time.

•Reduction in regeneration water.

•Independently time controlled air recharge cycles up to 24 times per day for greater oxidation capabilities.

•Corrosion resistant valve body.

•Built-in pressure relief valve.

•Less service on air compressor and longer life.

•Modular design for ease of service.

The Iron Curtain

•Requires no chemicals or salt for operation or regeneration.

•Requires no air injectors, venturis or micronizers.

•Removes dissolved and precipitated iron.

•Increases the pH of acid water on type “A” systems.

The Iron Curtain Filtration System is available in single, twin, triplex and four-plex filter configurations covering a wide range of flow rate applications from 5 gpm (gallons per minute) to over 800 gpm. There is a Hellenbrand Iron Curtain Filtration System for virtually any residential, commercial or industrial application.

Benefits of the ProMate 6.0 Iron Curtain™ Filter System

•Saves time and money cleaning rust stains in the bathroom, kitchen and laundry

•Clothing will be brighter, whiter and last longer.

•Decreases salt consumption for your water softener.

•Water using appliances and fixtures last longer and stay cleaner.

•Lengthens the life of your water softener and drinking water systems.

Model Number	Max. Service	Backwash
	Flow Rate (GPM)	Flow Rate (GPM)
PM6.0-IC10 2.0	5.0	5.0
PM6.0-IC12 2.0	7.0	8.0
PM6.0-IC13 2.0	8.0	10.0

1.Maximum service flow rates are for intermittent household use only.

2.Minimum of 30 psi required at backwash flow rates listed.

3.Water temperatures above 60ºF will require higher backwash rates.

4.Always have your water tested before you purchase any water treatment system.

5.See owner’s manual for specific operating conditions and limitations.

6.Contact your dealer or factory for larger flow rate applications.