Hellenbrand TN2 Series manual TN2 Standard System Design Options, 3200NXT Electronic Controller

TN2 Standard System Design Options

(for more specific information on the various system designs, contact your local Hellenbrand representative or go to: www.hellenbrand.com

1.	Single Tank Systems - XT Controller	3. Twin, Tri-Plex & Four-Plex Demand Recall Progressive
	• Time Clock	Systems - 3214NXT Controller
2.	• XT Controller Electronic Meter Demand	• 2-4 Units
	Twin, Tri-Plex & Four-Plex Systems - 3200NXT Controller	• Individual Meters
	Parallel Operation	• Single or Individual Brine Systems
	• 2-4 Units
	• Individual Meters

• Single or Individual Brine Systems

Alternating Operation

• 2-4 Units

• Twin Systems - One Meter or Two Meters

• Tri-Plex & Four-Plex Systems - Individual Meters

• Single or Individual Brine Systems

3200NXT Electronic Controller

The 3200NXT Network Controller uses on-board communica- tions capabilities to link multiple valves (via off-the shelf CAT3, CAT5, or better cables) for a variety of multiple system types as described above.

Program Features:

•2x16 character backlit LCD display

•Networks up to four units

•Auxiliary inputs and outputs

-Remote signal start input

-Remote lockout input

-Programmable relay output/chemical pump output

•Easy installation with plug-in wiring harnesses

•Front panel diagnostics button

-Flow rate

-Peak flow rate

-Totalizer

-Hours between last two regenerations.

-Hours since last regeneration

-Adjustable volume remaining

-Valve position

Three programming levels

•User mode

•Master programming

•Diagnostics mode

Note: The 3214NXT Demand Flow Network Controller is used for demand recall applications.

3214NXT Demand Flow Network Controller

The 3214NXT Demand Flow Network Controller can be pro- grammed to bring multiple units to the service position and back to standby based on system demand flow. The 3214NXZT De- mand Flow Network Controller used on-board communication capabilities to link multiple valves via standard CAT3, CAT5, or better communication cables.

Program Features:

•Network two to four valves

•Simple, on-site network programming

•Easy installation with plug-in wiring harnesses

•Shift key allows digit selecting in programming

•2x16 character LCD backlit display

(letter or digit codes not needed)

•Valve, piston, and cam type default storage

• User and master programming modes

• Diagnostic mode:

- Current flow rate

- Peak flow rate (can be reset) - Totalizer (can be reset)

- Hours between last two regenerations - Hours since last regeneration

- Volume remaining (adjustable) - Valve addresses

Three programming levels

•User mode

•Master programming

•Diagnostics mode

Mechanical or Electronic Meter/Turbine Options:

Size	Flow Ranges		Accuracy
1.5” CC Meter	0.5	– 60 GPM	+5%
2” CC Meter	1.5	- 150 GPM	+5%