Substrate Selector Guide
for an initial product recommendation
Loctite® Hysol® Epoxy adhesives bond a wide range of substrates.
Please refer to the chart below to select the best adhesive for your application. Each adhesive is colour coded to its product group. Refer to the following pages for product description and typical properties of the recommended adhesive.
Loctite® Hysol®
Steel
Stainless steel
Zinc dichromate steel
Hot dipped galvanised steel
Aluminium
Copper
Brass
Thermoplastics
Thermoset plastics
GRP / SMC composites
Rubbers
Glass
Ceramic
Masonry
Wood
Highly recommended 
Recommended
• Thermoplastics:
ABS, Acrylic, PA, PC, PVC, SAN
• Thermoset plastics:
DAP, Epoxy, Phenolic, Polyester
• Rubbers:
Butyl, EPDM, Natural, Neoprene, Nitrile, SBR
3421 | A&B | A&B | A&B A&B A&B A&B | A&B A&B A&B | A&B | A&B A&B A&B | A&B | A&B A&B A&B | 9492 | A&B | A&B | A&B | 9514 | ||||
3423 | 9481 | 9483 9484 9489 | 3430 9455 3422 9450 | 3450 | 3455 | 3463 | 3425 | 9466 | 9461 9464 | 9514 | 9496 | 9497 | 9535 9509 9502 | ||||
General purpose | Toughened | High temperature | |
epoxies | epoxies | epoxies | epoxies |
Page | Page | Page | Page |
6 | 8 | 10 | 12 |
Henkel recommends that the selected product for your specific application is evaluated to determine suitability. If you require additional information or advice, Henkel has technical personnel trained to provide on site design and engineering support, application testing, validation and integration of dispensing and cure systems.
The Loctite® Hysol® range is part of an extensive range of
4
