Model CF-941

3-6. OPERATION AND

Unit Operation

PROGRAMMING

 

Before operating the holding cabinet, read and understand this complete operation manual (supplied with each unit). The following steps are meant to be guidelines, not complete operating instructions.

1.Turn POWER switch to the ON position.

2.The display will show the setpoint temperature.

Press the TEMP button at any time to view actual temperature. The LED will light when the actual temperature is on the display.

3.When temperature LED illuminates, the unit setpoint temperature has been reached and product can be loaded into the pans. Load product into a pan inside the drawer and press appropriate timer button, either 1, 2, or 3.

4.At the end of the timing cycle, the display will flash “0:00” and the timer LED will flash.

If more than one timer is running at the same time, the timer with the least amount of time will be the one displayed and the LED will be flashing, indicating which timer is being displayed. Pressing and releasing the SET button will toggle through the different running times.

Temperature Setpoint Programming

Press and hold the TEMP button for 5 seconds, and the setpoint temperature will start flashing and the LED will turn off. Continue to hold in on the TEMP button, then use the UP and DOWN buttons to set the desired setpoint temperature. Releasing the TEMP button enters the setpoint into the controls. If “Loc” shows in the display when the UP or DOWN button is pressed, the controls must be unlocked before temperature can be changed. (See Special Program Mode).

3-4

203

Page 4
Image 4
Henny Penny CF-941 manual Unit Operation, Temperature Setpoint Programming

CF-941 specifications

The Henny Penny CF-941 is a state-of-the-art pressure fryer that has garnered recognition in the culinary industry for its innovative design and exceptional performance. Tailored for commercial kitchens, particularly in fast-food and casual dining establishments, the CF-941 delivers crispy and flavorful fried foods while enhancing operational efficiency.

One of the standout features of the Henny Penny CF-941 is its advanced pressure frying technology. This system cooks food using high-pressure steam, which not only speeds up the cooking process but also helps retain moisture, ensuring that the final product is juicy and tender. The pressure frying process also significantly reduces oil absorption, resulting in healthier fried items with a lower fat content.

The CF-941 comes equipped with a user-friendly digital control panel that allows operators to set precise cooking times and temperatures. This precision ensures consistent results across multiple batches, a crucial factor in high-volume operations. The digital display also includes options for programming cooking cycles and monitoring temperature, making it easy to maintain optimal frying conditions.

Durability is a hallmark of the Henny Penny CF-941, as it is constructed from high-quality stainless steel, which is resistant to corrosion and wear. The fryer features a robust design that can withstand the demands of busy kitchens. Additionally, the CF-941 is designed with operator safety in mind, incorporating features such as automatic pressure release, ensuring safe and easy handling.

Another key characteristic of the CF-941 is its energy efficiency. By utilizing a combination of pressure frying and efficient heat transfer mechanisms, this fryer minimizes energy consumption while maximizing output. This not only helps reduce operating costs but also contributes to a more sustainable kitchen environment.

In terms of capacity, the CF-941 has a generous frying basket size, allowing for larger batches of food to be cooked at once. This is particularly beneficial during peak service hours when demand is high. The fryer's design also allows for easy loading and unloading of food, streamlining the frying process and helping to increase productivity in the kitchen.

Overall, the Henny Penny CF-941 represents a significant advancement in frying technology, combining efficiency, safety, and quality. It is an excellent choice for operators looking to elevate their fried food offerings while optimizing their kitchen operations. Whether preparing chicken, vegetables, or other fried delights, the CF-941 is a reliable partner for achieving delicious results.