Power tool | Position I | Position II | Position III | |
|
|
|
|
|
SID 18ತA | 60 Nm (44 lb/ft) | 110 | Nm (81 lb/ft) | 165 Nm (122 lb/ft) |
SIW 18ತA (u೩" square | 75 Nm (55 lb/ft) | 120 | Nm (89 lb/ft) | 175 Nm (129 lb/ft) |
drive) |
|
|
|
|
SIW 18ತA (½" square | 90 Nm (66 lb/ft) | 135 | Nm (100 lb/ft) | 200 Nm (148 lb/ft) |
drive) |
|
|
|
|
Battery | B 14/1.6 | B 14/3.3 | B 18/1.6 | B 18/2.6 | B 18/3.3 |
|
|
|
|
|
|
Rated voltage | 14.4 V | 14.4 V | 21.6 V | 21.6 V | 21.6 V |
|
|
|
|
|
|
Battery capac- | 1.6 Ah | 3.3 Ah | 1.6 Ah | 2.6 Ah | 3.3 Ah |
ity |
|
|
|
|
|
|
|
|
|
|
|
Energy content | 23.04 Wh | 47.52 Wh | 34.56 Wh | 56.16 Wh | 71.28 Wh |
|
|
|
|
|
|
Weight | 0.36 kg | 0.58 kg | 0.48 kg | 0.78 kg | 0.78 kg |
| (0.79 lb) | (1.28 lb) | (1.06 lb) | (1.72 lb) | (1.72 lb) |
|
|
|
|
|
|
Temperature | Yes | Yes | Yes | Yes | Yes |
monitoring |
|
|
|
|
|
Type of cell | |||||
|
|
|
|
|
|
No. of cells | 4 | 8 | 6 | 12 | 12 |
|
|
|
|
|
|
en
5. Safety instructions
NOTE
The safety rules in section 5.1 contain all general safety rules for power tools which, in accordance with the applicable standards, require to be listed in the operating instructions. Accordingly, some of the rules listed may not be relevant to this tool.
5.1 General power tool safety warnings
a)
WARNING
Read all safety warnings and instructions. Fail- ure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your
5.1.1Work area safety
a)Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b)Do not operate power tools in explosive atmo- spheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c)Keep children and bystanders away while oper- ating a power tool. Distractions can cause you to lose control.
5.1.2Electrical safety
a)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b)Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c)Do not expose power tools to rain or wet con- ditions. Water entering a power tool will increase the risk of electric shock.
d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e)When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of
5
