Tape Operation
Tape Operation
Rec End Search
This feature allows you to quickly find the point at which your recording ends and a blank portion of tape begins for continuous recording.
In play, FF or stop mode, press the Rec End Search button on the remote control. The TV/VCR Combination will go into FF mode and then stop automatically around the end of your recording.
If the Rec End Search button is pressed where no signal is recorded, the TV/VCR Combination will go into rewind mode and then stop automatically around the end of your recording.
Before starting recording, play back the tape to determine where to start a new recording.
"REC END SEARCH" will appear on the TV while the search is in progress.
Time Search
The time search feature lets you enter a length of time to skip back or ahead. When the selected search length is completed, the TV/VCR Combination will automatically go into playback mode.
1 Press the Time Search button on the remote control in the stop or play mode.
This selects the time search display.
2 Enter one digit for the hour, two digits for the minute. This enters the length you want to skip back or ahead.
For example, for 1 hour 25 minutes, press 125.
For 5 minutes, press 005.
3 Press the FF or REW button to skip back or ahead.
The TV/VCR Combination will skip over the desired length of time and go into playback automatically.
Make each key entry for your length selections within 10 seconds, or the
33