Tape Operation
TV/VCR Combination will automatically cancel this mode.
Auto Play with Repeat Function
Picture of Remote Buttons
1 Press the Repeat button during playback, still, search, or slow.
a)The Repeat indicator appears. Playback will continue to the end of the tape unless there is more than 30 seconds of blank space on the tape. Erased portions of tape are not considered to be blank.
b)When playback stops, the tape will automatically rewind to the beginning. During rewind, if the channel you selected through the TV/VCR Combination tuner is not tuned to an active channel, a blue background will be displayed.
c)Playback will begin again and continue to the same point where the first playback stopped and continue to repeat to that point until another function button is pressed.
2 To release the auto repeat, press the Repeat button again. You can also press another button to stop repeat playback.
The Counter memory does not function during auto repeat.
Time Counter Control
If your tape is fully rewound each time, then you can reset the counter to use a list of program locations as an index. You can also reset the counter at any location, and use it to return to that location for repeat playback. Be sure the time counter overlay is displayed when you use the time counter. To remove an overlay, press the Recall button again. (See "VCR Status Display" on page 8 for more information.)
1 To select the time counter overlay, press the Recall button once or three times. The time counter display appears on the TV screen.
2 To reset the time counter, press the Reset button. Reset the counter to zero at whatever point you choose on the tape.
3 To select the memory function, press the Memory button. Select memory during any operation with the time counter overlay showing.
34