Manuals / Hitachi / Household Appliance / Water Pump

Hitachi 210313 manual Operation, Pressure Relief Procedure, Flushing the Pump

Models: 210313

1 16
Download 16 pages 21.15 Kb
Page 8
Image 8

Operation

Pressure Relief Procedure

WARNING

INJECTION HAZARD

Fluid under high pressure can be in- jected through the skin and cause seri- ous injury. To reduce the risk of an injury

from injection, splashing fluid, or moving parts, fol- low the Pressure Relief Procedure whenever you

DAre instructed to relieve the pressure

DStop spraying/dispensing

DCheck or service any of the system equipment

DInstall or clean the spray tips/nozzles

1.Engage the safety latch.

2.Shut off the power supply to the hydraulic motor.

3.Disengage the gun safety latch.

4.Hold a metal part of the gun firmly to the side of a grounded metal pail. Trigger to relieve pressure.

5.Open the fluid drain valve (required in your sys- tem) having a container ready to catch the drain- age. Leave the drain valve open until you are ready to spray again.

If you suspect that the spray tip or hose is completely clogged, or that pressure has not been fully relieved after following the steps above, very slowly loosen the tip guard retaining nut or hose end coupling and relieve pressure gradually, then loosen completely, then clear the tip or hose.

CAUTION

When shutting down the hydraulic system, always shut off the hydraulic supply line shutoff valve (S) first, and then the return line shutoff valve (E). This is to prevent overpressurizing the motor or its seals. When starting the hydraulic system, open the return line shutoff valve first.

Flushing the Pump

Flush the pump before using it for the first time to remove the lightweight oil which is left in the pump after factory testing to protect it from corrosion. Be sure the solvent used is compatible with the fluid to be sprayed, and with the wetted parts of the pump. Refer to the Technical Data in the separate displacement pump manual for the wetted parts. Flush until clean solvent comes from the gun. In a circulating system, flush long enough to clean the entire system.

8307160

Page 7 Page 9
Page 8
Image 8
Hitachi 210313 manual Operation, Pressure Relief Procedure, Flushing the Pump
Page 7 Page 9

210313 specifications

The Hitachi 210313 is an advanced high-performance digital solution designed to meet the needs of industries requiring reliable data management, efficient processing capabilities, and innovative technologies. This model stands out due to its robust functionality and adaptability, catering to various applications.

One of the primary features of the Hitachi 210313 is its high-speed processing capabilities. Powered by cutting-edge processors, this system is capable of handling large volumes of data seamlessly while maintaining high efficiency. The device is equipped with advanced memory technologies that optimize data flow and enhance the overall performance. This ensures that users experience minimal latency even when performing complex data operations.

The Hitachi 210313 employs an intuitive user interface that makes navigation simple and straightforward. Users can easily access various functionalities, customize settings, and generate reports with minimal effort. This focus on user experience is further complemented by its ability to integrate with existing IT infrastructures, offering flexibility and ease of deployment.

In terms of connectivity, the Hitachi 210313 supports multiple input and output options, including USB, Ethernet, and wireless connections. This versatility enables users to connect various devices and systems seamlessly, facilitating better collaboration and data sharing within teams. Additionally, the model offers advanced security features, ensuring that sensitive information is protected from unauthorized access.

Another notable characteristic of the Hitachi 210313 is its scalability. Designed to grow with the needs of the business, this solution can adapt to various workloads and operational requirements. Whether a small enterprise or a large corporation, users can enhance their systems by adding modules or upgrading components as necessary.

The Hitachi 210313 also emphasizes sustainability, utilizing energy-efficient components that help reduce the overall environmental impact. By minimizing power consumption without compromising performance, this equipment aligns with modern eco-friendly practices, making it an appealing option for environmentally conscious organizations.

Overall, the Hitachi 210313 combines powerful features, innovative technologies, and user-focused design to deliver a robust solution that meets the evolving demands of data-centric industries. Its blend of performance, security, and scalability makes it a valuable asset for businesses looking to optimize their data management processes.