HOW TO USE THE REMOTE TO CONTROL YOUR TV | 16 |
turned on.
2 SLEEP ButtonPress this button to display the SLEEP TIMER in the lower left corner of the screen. Every subsequent press of this button will add 15 minutes to the timer, up to a maximum of three hours.
3 MENU, CURSOR ButtonsAll
The CURSOR buttons will highlight functions or adjust and set different features. Pressing the cursor button will also give you access to the FAMILY FAVORITES CHANNELS
Enter two or three numbers to select channels. Enter 0 first for channels 1 to 9 . For channels 100 and above, press the "1" button and wait four two seconds before pressing the last two digits of the channel.
Channel selection may also be performed by pressing CH up (
) or down (
).
You may also use these buttons for channel scanning. Press and hold the CH up (
) or down (
) buttons and
the TV will quickly scanning through the channels. Release the CH (
) or down(
) buttons when the TV scans to the channel you wish to watch and the TV will tune to that channel.
NOTE: The TV may not receive some channels if you are not in the correct SIGNAL SOURCE mode. (See page 35.)
5 INPUT ButtonThe INPUT button will select between the antenna signal and the video input jacks each time the button is pressed. (See picture below and page 27.)
FOR 32CX32BFOR 27CX21B6, 7 VOLUME, MUTE ButtonsPress the VOLUME up (
) or down (
) button until you obtain the desired sound level.