TV REAR PANEL CONNECTIONS

- 12 -

Use this 15-pin D-SUB Input for your PC connection. (see page 43)

6 PC Audio Input

Connect external devices for audio in PC mode. (see page 46)

7 PC Mouse Control

Use this input for remote control mouse operation (see page46)

TIPS ON REAR PANEL CONNECTIONS

IMPORTANT: TURN POWER OFF ON THE TV/PC MONITOR AND THE PC BEFORE CONNECTING OR DISCONNECTING ANY CABLES.

The S-Video connection is provided for high performance laserdisc players, VCRs etc., that have this feature. Use this connection in place of the standard video connection if your device has this feature.

If your device has only one audio output (mono sound), connect it to the left audio jack on the TV.

Refer to the operating guide of your other electronic equipment for additional information on connecting your hookup cables.

TV REAR PANEL CONNECTIONS

Rear Panel Connections Illustration

Typical full feature set-up. Follow connections that pertain to your to personal entertainment system.

EXTERNAL CONNECTIONS

CONNECTING EXTERNAL AUDIO AMPLIFIER

To control the audio level of an external audio amplifier with the remote control, connect the system as shown below.

NOTE: To prevent damage to the speaker and distort sound, set the volume control of the audio amplifier lower and adjust the sound using the remote control of the TV set.

CONNECTING EXTERNAL VIDEO SOURCES

The exact arrangement you use to connect the VCR, camcorder, and laserdisc player to your TV set is dependent on the model and features of each component. Check the owners manual of each component for the location of video and audio inputs and outputs.