Hitachi 42HDF52 important safety instructions Change Password, Reset Default

SETTING UP YOUR DTV

Change Password

To change password, enter the Change Password Number option in CHANGE PASSWORD function, press OK button to change password. Enter four digital password in enter new password number. And then confirm the password by entering the same password again.

NOTES: 1. Before you change the password, uses the default password “0000” to enter the Menu item which requires the password.

2.If you forget the password, please use the password “1688” to enter.

3.To enter the new password, and follow the instruction.

English

Reset Default

This function allows to reset receiver back to factory default status.

1.Press Ÿź buttons to highlight the “Reset Default”, and then press OK to into the rating control menu.

2.There will pop up the RESET confirmation message “Press Yes will reset default to default value”. Press OK on “Yes” to process. Press OK on “NO” to cancel the setting.

Français

CLOSED CAPTION

1.When you learn from the I-PLATE that there is Closed Caption data on the current channel, you can press CC button on the remote control to display C.C. Option list it on the TV screen.

2.Use Ÿ and ź keys to highlight the desired CC signal and press OK button.

3.After the type of Closed Caption has selected, press EXIT or CC key to cancel the CC Option list, then you can watch this Digital TV program with Closed Caption.

FAVORITE CHANNEL LIST

1. When you are watching terrestrial or cable TV channels, you can press “FAV” button on the remote control to call up the Favorite List.

2. Use W and X keys to navigate “ALL”, “ATSC”, “NTSC” and “FAV” program lists.

3. Use Ÿ and ź keys to browse through the selected program lists and highlight the program you like to watch, then press OK button.

NOTE: Press Numeric Key to Select Digital Channel

For the digital channel number is different with the traditional NTSC channel number. Please follow below indication to select the digital channel if you prefer to use numeric key to do the channel selection.

Example: digital channel number: 10 - 2 1. press numeric key “1” and “0”

CARE2.OFpressYOUR“X“ buttons HITACHI PLASMA DISPLAY

3. press numeric key “2”

39