To operate your TV, point the remote control at the remote sensor of the TV and press the TV button. The remote will now control your television.
To operate your VCR, point the remote at the remote sensor of the VCR and press the VCR button. The remote will now control your VCR. (See page 25 for instructions on how to program the remote to control your VCR.)
To operate your cable box, point the remote at the remote sensor of the cable box and press the CABLE button. The remote will now control your cable/satellite box. (See page 26 for instructions on how to program the remote to control your cable/satellite box.)
(1)These buttons allow the remote to control your TV, VCR, or cable box depending on which mode is chosen, as explained above.
(2), (3) LIGHT BUTTON
When you are in a dark room, press the light button (2) on the side of the remote to light up the buttons shown in (3) . The light will stay on for about 8 seconds if the light button is not pressed again. These buttons will not appear to light if the room is too bright.
(4) PRECODED VCR BUTTONS
These buttons always transmit the chosen precoded VCR codes.
(5) TV/VCR BUTTON
When the remote is in the TV or VCR mode, this is the TV/VCR button.
When the remote is in the CABLE mode, this is the A/B button.