Hitachi 43GX10B, 50DX10B, 50GX30B, 60DX10B important safety instructions Rear Panel Jacks

REAR PANEL JACKS

STOP

REAR SPEAKER

VHF/UHF

L

R

SP. MATRIX

SURROUND

EXT.

AUDIO TO HI-FI

CONNECT ONLY 8 OHM SPEAKERS

DO NOT SHORT CIRCUIT

THESE TERMINALS.

(Such damage is NOT COVERED by your television warranty)

S-VIDEO S-VIDEO

VIDEO	VIDEO	Y/VIDEO	VIDEO
(MONO)/L	(MONO)/L	PB (MONO)/L
			L
		PR
R	R	R	R
AUDIO	AUDIO	AUDIO	AUDIO
INPUT 1	INPUT 2	INPUT 4	MONITOR
			OUT

ANTENNA INPUT

Use an F type coaxial cable to connect an antenna or cable TV (CATV) output to this rear jack.

AUDIO/VIDEO INPUTS 1, 2, 4

The INPUT button will step through each video source and antenna source input each time it is pressed. Use the audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players etc. (If you have mono sound, insert the audio cable into the left audio jack.)

NOTE: You may use VIDEO or S-VIDEO inputs to connect to INPUT 1 or 2, but note that only one of these may be used at a time.

MONITOR OUT

These jacks provide fixed audio and video signals which are used for recording.

AUDIO TO HI-FI

These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the stereo can be controlled by the television s main volume.

S-VIDEO INPUTS 1 and 2

INPUTS 1 and 2 provides S-VIDEO (Super Video) jacks for connecting equipment with S-VIDEO output capability.

COMPONENT VIDEO: Y-PBPRINPUT 4

INPUT 4 provides Y-PBPRjacks for connecting equipment with this capability, such as a DVD player.

NOTE: Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV s PB input and the components R-Y output to the TV s PR input.

Your component outputs may be labeled Y-CBCR. In this case, connect the components CB output to the TV s PB input and the com- ponents CR output to the TV s PR input.

It may be necessary to adjust TINT or turn AUTO COLOR-ON to obtain optimum picture quality when using the Y-PBPRinputs. To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-PBPRjacks.

Y-PBPRcan only receive 480i signals.

Input 4 (Y/VIDEO) can be used for standard video input.

SPEAKER MATRIX SURROUND Switch

Use this switch to choose between the surround and external speaker features. See page 17 for AUDIO SYSTEM SETUP. The TV s Internal Speakers will be switched off when EXT. is selected.

REAR SPEAKER Terminals

These terminals are used to connect external speakers, which are used for the surround sound feature. The volume level is controlled by the remote control main volume buttons. Use speakers with 8 Ohm impedance only.

10