PICTURE-IN-PICTURE (PIP)

as the main channel.

When the COMPONENT: Y-CB-CR Input 2 is selected as PIP, it will appear as a blank sub-picture.

PICTURE-IN-PICTURE CONT.

SURF MODE PIP

This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, along the right edge of the screen. Press the PIP button a second time to remoe the sub-pictures from the screen.

NOTE:

1.If no buttons are pressed when in SURF mode, auto-scanning will continuously scan.

2.If a channel is tuned during this SURF scanning, sub-pictues will be removed from the screen.

3.If PARENTAL CONTROL MOVIE/TV RATINGS setting is ON, PIP Surf Mode is deactivated.

4.You must be in ANT A mode for SURF PIP to operate.

(2) SWAP Button

If you wish to switch what is being shown on the main picture to the sub-picture, press the SWAP button.

NOTE:

1.The SWAP button will only operate when SINGLE PIP mode is chosen.

2.The SWAP function will not operate if ANT B input is set as the main channel (ANT B input cannot be displayed as a sub-picture.

(3) MOVE Button

To move the sub-picture to another corner, press the MOVE button. The sub-picture moves one step counterclockwise every time the MOVE button is pressed. (Example below illustrates the MOVE operation for initial shipping conditions. If you have customized a PIP position, the MOVE operation may differ slightly from this example).

It is also possible to customize the PIP position. To do htis, wati until the On-Screen Display disappears (about eight seconds) and then use the CURSOR , , , buttons.

32